Photobucket

Gungnir's paper stuff

Pictures of your latest projects

Re: Gungnir's paper stuff

Postby Gungnir » Mon Sep 01, 2014 5:22 pm

After looking at the tanks for a few days i decided I was not happy with them.

So I'm changing them.

Just redid the small one.

The wall sheets are now 120x240 scale centrimeters instead of 60x120 - now it looks less like brick.

The top now has a spiderweb-like design of large sheets.

Sorry, no pics, not building it again, the size stayed the same.

You'll have to wait forthe final version.
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Tue Sep 02, 2014 9:44 pm

Finished all the tanks, and nearly completed the office annex pumping station.

When that's done I'll still have to covert them to a better printable format - I draw in PCX format, and the print guy can't handle that - and add some pognant instructions.

Went faster than I thought.
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Fri Sep 05, 2014 7:52 pm

While the printer is putting the finishing touches to the tank farm I did some work on another long0suffering model, a Dutch detatched house.

Image

This is the second version. The first one was not as deep, but after I'ld printed out the sheet I noticed there was enough space lefyt over to add another 1.8 scale maters to the side walls.

Might have to shorten the roof overhang a bit, one of the options is with a kitchen extension, that will still have to fit under it.

I'm picturing five versions:

- plain
- wood-clad gable
- extra dormer window(s?)
- kitchen extension
- bay window.

And yes, it will have doors and windows and stuff like that. I first considered selling them as an expensive options sheet, but I doubt the punters would go for that.
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Mon Sep 08, 2014 9:09 pm

Tank farm is done, I just finished the final build.

Tomorrow they'll go on the webshops, in h0, N and Z gauges.

Image

Sorry for the bit crowded pic, my desktop just isn't any bigger.
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Tue May 31, 2016 9:14 pm

First model since my brain surgery. Since I still have some concentration problems it's a version of an earlier one. It will be available in the model railroad scales h0, N and Z.

Image
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Greystreak » Wed Jun 01, 2016 3:53 pm

Nice to see you haven't lost your touch! <tu>
Bryce
User avatar
Greystreak
Llama Corporal
Llama Corporal
 
Posts: 394
Joined: Sat Oct 12, 2013 12:17 am
Location: On Campaign

Re: Gungnir's paper stuff

Postby Gungnir » Sun Jun 05, 2016 7:45 pm

I'[m considering some Nissen huts, in both the smallest and tha largest of the three versions, in both military and civilian versions.

This is a proof-of-concept kinda testbuild of the smallest one in 28mm, to see if I got the proportions right. Still needs the bay-like side windows and door.

Image
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Mon Jun 06, 2016 7:17 pm

Made templates for optional side door and window. They fit.

Don't pay any attention to the colour, I ran out of white paper in the correct thickness.

Image
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Tue Jun 14, 2016 7:55 pm

Beta build of the Nissen hut.

As you van see I made the windows wider than in the first version.

Since our printer is currently in Andorra - don't ask - and we only have a black and white printer, I used green paper to approximate the final result.

This one has corrugated metal end walls, there will also be optional wooden end walls.

The grey version will come in two versions too: completely metal like this one or with brick end walls with wooden garage-type doors.

All models will come with the optional side door and six bay windows, so many building varieties will be possible.

Image
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby subedai » Tue Jun 14, 2016 8:07 pm

Looking good Gungs.

MickS
User avatar
subedai
Lieutenant
 
Posts: 1478
Joined: Tue Nov 05, 2013 6:08 pm
Location: Lost somewhere in The Garden of England

Re: Gungnir's paper stuff

Postby Gungnir » Thu Jun 23, 2016 8:59 pm

The grey version is done, the final green version will follow soon(ish).

Image

Image

Each set consists out of a roof, two sets of end walls, open and closed garage doors, a side door and six bay windows, so plenty of opportunities for customizing.
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Thu Jun 30, 2016 8:14 pm

Finally managed to work a little on the final build of the small green Nissen huts. Far from finished, but progress.

Image
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Sat Jul 02, 2016 7:30 pm

Got around to finishing the green version. Two varietes of end walls, corrugated metal and wood. Again, an optional side door and sixd windows are supplied with this kit.

Image

Image
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Mon Jul 04, 2016 6:10 pm

Army tents have ben on my to-do list for a long time, finally got around to doing one.

The shape came out okay, the size less so. It was supposed to be 28mm, but as you can tell by the 1/72 figure next to it it came out more like 15mm.

No prob, that can be fixed.

Image

I plan to do two versions: green for WWI and on, white for older periods but also for instance for Wild West colonist.

Regular A-shape tents will accompany this model eventually.
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Sun Jul 17, 2016 3:43 pm

Beta build of tent A.

I had no suitable 28mm figures to go with it for scale, but luckily this heroic dude with the tin suit volunteered.

All I have to add is a flap, and two more models.

Image
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Mon Jul 18, 2016 7:45 pm

First draft of the second tent.

Image

Besides the two colours, white and green, there will be two versions: one closed and one with one open flap.
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Jeff » Tue Jul 19, 2016 8:51 am

Love it!
Origami next?
User avatar
Jeff
Lieutenant
 
Posts: 1690
Joined: Sun Oct 13, 2013 8:40 pm

Re: Gungnir's paper stuff

Postby Gungnir » Tue Jul 19, 2016 8:31 pm

Seriously doubt in. No idea what will be next, too many ideas - might pick one of those, or go with something totally else.

I've been looking at German tents, but the Splittermuster is discouraging.

For the civilian side I've been collecting material for a concrete garage.
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Thu Jul 21, 2016 7:47 pm

Beta-build of tent B, now all that remains is a small two-man tent, tent C.

I managed to find some slightly darker green paper, so I can print the final version on that. There will be a choice of scales, and white or green.

Image
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

Re: Gungnir's paper stuff

Postby Gungnir » Fri Jul 22, 2016 8:15 pm

Tent C. This simple 2-man tent is the tent equivalent of the T-34: cheap. simple construction, typical herd animal.

Image
I did not lose my mind. It ran away screaming.
User avatar
Gungnir
Colonel
 
Posts: 4640
Joined: Fri Oct 11, 2013 7:50 pm
Location: Veendam, Netherlands

PreviousNext

Return to Gallery



Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB® Forum Software © phpBB Group
Theme modified by Captain Sausage